Table of Contents
Advertisement
Hookups and Getting Started
VCR Plus+ Channel Setup (Advanced Cable)
1 Find the VCR Plus+ Channel Listing in your program
guide. For details, see page 43.
2 Set unscrambled and scrambled channels as shown
below.
Select SET VCR Plus+
Press MENU.
CHANNELS.
neny
wey
> Habe SET/CHECE,
TIMER SET/CHECK
TUWER PRESET
;
TUNER PRESET
SET VCR Pluse CHANNELS
> SET WER Pluse CHANNELS
x
SET
CLOCK SET
ff
For unscrambted channels
(A/B switch set to A.)
Enter the program guide
channel, then the channel
your VCR uses.
For scrambled channels
(A/B switch set to B.)
Enter the program guide
channel, then the cable box
output channel.
SET VCR Plus+ CHANNELS
SET VCR Plus+ CHANNELS
GUIOE CH
TV CH
GUIDE CH = TV_CH
4
-
22
x
3
-
ll
ae
-
Program listing
guide channel
Set to the same
cable box channel.
Your cable box channel (2, 3 or 4)
Details are on page 44.
Program listing
guide channel
Your actual cable channel
16 | Preparation
To Watch the TV
1 Turn your VCR off, or press the VCR's TV/VTR button
until the VTR indicator in the display window goes off.
2 Set A/B switch to B.
3
Switch on your cable box.
4
Tune the TV to the cable box output channel
(usually 2, 3, or 4).
5
Select the channel you want to watch with your cable
box.
6
After watching the TV, please remember to retum the A/B
Switch and cable box channel to the correct position.
To Watch the VCR
1
Tune the TV to CH 3 or CH 4, (or to A/V input if you
made A/V connections.)
2
Insert a cassette and press [> PLAY.
Details are on page 28.
To Record A Program
@ Unscrambled Channels
1
Switch the A/B switch to 'A'.
2
Press VCR Plus+ on the Remote Commander.
3 Enter the program's PlusCode number.
4
Press ONCE, DAILY, or WEEKLY on the Remote
Commander.
Insert a blank cassette.
Press TIMER REC on the Remote Commander.
Leave the A/B switch in 'A'.
NOOO
Scrambled Channels
Switch the A/B switch to 'B'.
Switch on the cable box.
Select the channel you want to record on the cable box.
Enter the program's PlusCode number.
Press ONCE, DAILY, or WEEKLY on the Remote
Commander.
6
Insert a blank cassette.
7
Press TIMER REC on the Remote Commander.
8
Leave the A/B switch in 'B'.
Details are on page 45.
arond
= @
Advertisement
Table of Contents
