8
Menu Display
Function to decide whether work with menu (including relevant menus too) of control key
Enter possible) or not
• Although select
enter installation menu is available.
• When select
OSD Display
Decide to display OSD or not by setting
• When
OSD Display
• Although select
enter installation menu and entering service menu are available. (In-Start, Power-Only, Adjust,
Installation Menu ...)
System Provider Mode
System Provider Mode
but access is controlled as follows:
• When value is On, Accessible Items on the menu system, others are not permissible.
- Input select screens
-
Sleep Timer
-
Aspect Ratio
-
Closed Caption
- Safety / My Media / About This TV
• Q.menu, which is related to
• If the channel map is empty, Auto-tuning guide dialog should be blocked by pressing List, Fav,
CH+ (Page up), CH- (Page down) keys.
Power Management
The
Power Management
from either the Local or IR Key within a selected hours.
• Activity on either of these inputs shall restart the
again.
• This entry can be set to a value which is corresponding to the desired hours (1 to 7).
• Default value is
Off
(disabled).
• TV should off and on after apply this setting.
DTV Channel Update
It is a mode to set whether to update DTV channel information automatically or not.
• When
DTV Channel Update
channel's stream information
•
DTV Channel Update
information is changed.
(Off
– Enter Impossible).
Off
(Enter impossible), the action that press a Menu button for 5 seconds to
On
(Enter possible), Menu works.
Off
is set to
(Do not Display), all OSD is not displayed except some exception.
Off
(Do not Display), the action that press a menu button for 5 seconds to
allows access to the menu system from the front panel or remote control
Channels
feature will turn off the television receiver if no input control command is received
is set to Auto, the function to update TV's channel map according to DTV
is set to Manual, the function to keep TV's channel map even though DTV channel's
OSD Display
as
On
(Display) or
of User Menu, is not accessible.
Power Management
timer and check key time interval
(On
–
Off
(Do not Display).