LG LT340C9U Series Installation Manual page 21

4 15Min Auto Off
15Min Auto Off
• When
5 Auto Sensing
• The input is automatically switched when the input signal that you set to
Auto Sensing is set to Off, the input is not switched when the input signal is received.
• If
• If SIMPLINK is set to On,
• If the signal is removed while
previous setting.
• If the several inputs are connected by enabling
several times, the input returns to the previous setting only for the last input and does not repeat the
operation for the rest.
• For the AV input connected using the euro scart cable,
because the Auto AV function is enabled.(For other inputs,
6 Forced DVI Audio
• When Forced DVI Audio
RGB, AV, or Audio In #1 component ports.
• The video signal will be transmitted through HDMI to be displayed on the screen in standard quality.
• For the audio signal, the priority order is the RGB → AV → Audio In component ports.
7 Video Mute
• When Video Mute is set to On, for Blank.
8 Noise Mute
Noise Mute is set to On, audio mutes when no signal is present.
• When
9 Wake On Lan (Depending upon model)
• If set to On, user can turn on the TV by using LAN network.
10 DPM
• You can configure the
• If this option is not set to Off, the TV set enters the
set to Off / 5 sec / 10 sec / 15 sec / 1 min / 3 min / 5 min / 10 min.
• If you set this option to Off, the
is set to Enable, TV will turn off if there is no signal in 15Min.
HDMI is automatically set to
Auto Sensing
(automatic input switch) is enabled, the input returns to the
is selected, the audio signal from the HDMI port will be transmitted through the
DPM
(Display Power Management) function.
DPM function is disabled.
Off and can not work.
Auto Sensing and the automatic input switch is performed
Auto Sensing does not work for the TV input
Auto Sensing
DPM mode when there is no input signal.
On is received.
works normally.)
DPM
21
can be