Programme Change; Menu Display; Osd Display; System Provider Mode - LG LT340C Z Series Installation Manual

8

Programme Change

Decide to change Programme or not by setting Programme Change as On (Change Possible) or Off(Change Impossible) when present source
is TV.
• When Programme Change is set to Off (Change Impossible)
- Programme Key, Numeral Key, List Key, Q.View Key don't work and entering Programmes Menu in the Main Menu OSD is impossible.
- Programme item in Timer Power On menu will be fixed.
- Entering Setup Menu or Programmes Menu in the Main Menu OSD is impossible regardless of Setup Menu or Programmes Menu item
• When Programme Change is set to On (Change Possible), Programme Key, Numeric Key, List Key, Q.View Key does work and entering
Programmes Menu in the Main Menu OSD is possible.

Menu Display

Function to decide whether work with menu (including relevant menus too) of control key (On – Enter possible) or not (Off – Enter Impossible).
• Although select Off (Enter impossible), the action that press a Menu button for 5 seconds to enter installation menu is available.
• When select On (Enter possible), Menu works.

OSD Display

Decide to display OSD or not by setting OSD Display as On (Display) or Off (Do not Display).
• When OSD Display is set to Off (Do not Display), all OSD is not displayed except some exception.
• Although select Off (Do not Display), the action that press a (SETTINGS) for 5 seconds to enter installation menu and entering service menu
are available. (In-Start, Power-Only, Adjust, Installation Menu ...)

System Provider Mode

System Provider Mode allows access to the menu system from the front panel or remote control but access is controlled as follows:
• When value is On, Accessible Items on the menu system, others are not permissible.
- Input select screens
- Sleep Timer
- Aspect Ratio
- Subtitles
- Lock System, Set Password
- My Media / Network Menu
- Support Menu
• Q.menu, which is related to Setup Menu or Programmes Menu, is not accessible.
• If the Programme map is empty, Auto-tuning guide dialog should be blocked by pressing List, Fav, CH+ (Page up), CH- (Page down) keys.