Table of Contents
Advertisement
• Digital Antenna/Cable/Satellite
[Data 00][Data
01]: Channel Data
Data
00 : High byte channel data
Data
01 : Low byte channel data
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data
02 : Input Source (Digital)
- 10 : Antenna TV (DTV)
- 20 : Antenna Radio (Radio)
- 40 : Satellite TV (SDTV)
- 50 : Satellite Radio (S-Radio)
- 90 : Cable TV (CADTV)
- a0 : Cable Radio (CA-Radio)
• Tune Command Examples:
1 Tune to the Analog antenna (PAL) Channel 10.
Set ID
= All = 00
Data
00 & 01 = Channel Data is 10 = 00 0a
Data
02 = Analog Antenna TV = 00
Result = ma 00 00 0a 00
2 Tune to the digital antenna (DVB-T) Channel
01.
Set ID
= All = 00
Data
00 & 01 = Channel Data is 1 = 00 01
Data
02 = Digital Antenna TV = 10
Result = ma 00 00 01 10
3 Tune to the satellite (DVB-S)
Channel 1000.
Set ID
= All = 00
Data
00 & 01 = Channel Data is 1000 = 03 E8
Data
02 = Digital Satellite TV = 40
Result = ma 00 03 E8 40
Ack
[a][
][Set
ID][
][OK][Data 00][Data
[Data
02][x][a][
][Set
ID][
* For South Korea, North/Latin America except
Colombia Model
►To tune channel to following physical/major/
minor number.
01]
][NG][Data
00][x]
Transmission
[m][a][ ][0][
][Data
00][
][Data
[Data
02][
][Data
03][
][Data
- Digital channels have a Physical, Major, and
Minor channel number. The Physical number is
the actual digital channel number, the Major is
the number that the channel should be mapped
to, and the Minor is the sub-channel. Since the
ATSC tuner automatically maps the channel from
the Major / Minor number, the Physical number
is not required when sending a command in
Digital.
• Analog Antenna/Cable
Data
00 : Physical Channel Number
- Antenna (ATV) : 02~45 (Decimal: 2
~ 69)
- Cable (CATV) : 01, 0E~87 (Decimal : 1,
14~135)
[Data
01 ~ 04]: Major/Minor Channel Number
Data
01 & 02: xx (Don't care)
Data
03 & 04: xx (Don't care)
Data
05: Input Source (Analog)
- 00 : Antenna TV (ATV)
- 01 : Cable TV (CATV)
• Digital Antenna/Cable
Data
00 : xx (Don't care)
[Data 01][Data
02]: Major Channel Number
Data
01 : High byte Channel Data
Data
02 : Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data
04]: Minor Channel Number
Data
03 : High byte Channel Data
Data
04 : Low byte Channel Data
Data
05 : Input Source (Digital)
- 02 : Antenna TV (DTV) – Use Physical
Channel Number
- 06 : Cable TV (CADTV) – Use Physical
Channel Number
- 22 : Antenna TV (DTV) – Don't Use
Physical Channel Number
- 26 : Cable TV (CADTV) - Don't Use
Physical Channel Number
- 46 : Cable TV (CADTV) – Use Major
Channel Number Only (One Part
Channel)
* Two bytes are available for each major and minor
channel data, but usually the low byte is used
alone (high byte is 0).
45
01][ ]
04][
][Data
05][Cr]
Advertisement
Table of Contents
