Table of Contents
Advertisement
Welcome Video
* (Depending upon model)
• This feature allows you to download videos via USB storage to display on your TV after your TV boots up
and the boot logo appears.
1 Go to
General
→
Welcome
(1) Welcome Video
• You can set to Off, Once or Repeat using the
NOTE
1 Operation
• The video displays after your TV is turned on and the boot logo appears.
• If
Welcome Video
is enabled and a video is downloaded on the TV, the video plays.
• The time it takes a video to be displayed may differ depending on the decoding time of the video.
• In case of a corrupted or damaged file, the video may abruptly stop without an error displayed.
• The timer features such as
• USB Autoplayback starts after the
• Controls for playing the video are not available. (Pause, stop, fast forward, etc.)
2 Using the keys
• Only eight keys (Vol +, Vol -, Mute, OK, Exit, CH up, CH down and Back) can be used while playing video.
• The OK, Exit, CH up, CH down, or Back key can cancel playing a video.
3 Using RS232C
• Only the following commands work: KE(mute), KF (volume), and MC(data – volume, mute, ch).
4 Downloading
• Videos in any file format that the TV supports can be downloaded and displayed.
• Videos up to 50MB can be downloaded.
• For detailed information about downloading videos, go to
• Please do not use the ampersand character(&) and the left angle bracket (<) in the filename to use DZM
EZ
Download.
file on
Video.
button
Timer Power Off
Sleep Timer
and
Welcome
Video.
are not available during playback.
→
TV Manager
Ez
Download.
27
Advertisement
Table of Contents
