Sony TRINITRON KV-13M10 Service Manual page 23

V.SIZE ADJUSTMENT (VSIZ)
1. Input a cross-hatch signal.
2. Set to service adjustment Mode.
3. Select VSIZ with|1|and|4}.
4. Adjust with [B]and|6|for the best vertical size.
5. Write into the memory by pressing [MUTING] then
ENTER] .
V. SIZE (VSIZ)
[V.CENTER ADJUSTMENT (VPOS)|
1. Input a cross-hatch signal.
2. Set to service adjustment Mode.
3. Select VPOS with[1]and|4].
4, Adjust with[3]and|6|for the best vertical senter.
5. Write into the memory by pressing [MUTING|then
V. CENTER (VPOS)
-LI-C1
H.CENTER ADJUSTMENT (H POS
Note: Perform this adjustment after HFREQUENCY
ADJUSTMENT (HFRE).
1. Input a cross-hatch signal.
2. Set the Service adjustment mode.
3. Select HPOS with|1| and|4| :
4. Adjust with|3|and|6|to the best horizontal center.
5. Write into the memory by pressing [MUTING] then
H. CENTER (HPOS)
J+J +
KV-13M10/MT1300/
RM-Y116 RM-Y123
KV-14R10/1460R
RM-Y116 RM-Y123
V LINEARITY (VLIN) AND V CORRECTION (VSCO)
ADJUSTMENTS
1. Input a cross-hatch signal.
2. Set to Service adjustment Mode.
3. Select VLIN and VSCO with[I]and|4].
4, Adjust with Bland |6|for the best picture.
5. Write the memory byPressing then
ENTER}.
V LINEARITY =
V CORRECTION =
—