KV-13M10/MT1300/
RM-Y116 = RM-Y123
KV-14R10/1460R
RM-Y116 RM-Y123
«
| Affix a Permalloy ass'y corresponding
to the misconverged areas
(2)Dynamic Convergence Adjustment
Preparation:
1. Slightly loosen deflection yoke screw.
2. Remove deflection yoke spacers.
3. Move the deflection yoke for best convergence as shown below.
4, Tighten the deflection yoke screw.
5. Install the deflection yoke spacers.
Permalloy assembly