Focugersseecececeseeeeeeneeeeeneeseseeeeeeeeeseeeeeeeeeseeeeeeeeues; Screen (G2)Rrcrereeeetteseetsreseeeeeeesrrrseeeesseneees Sees; Esse Eeees - Sony TRINITRON KV-13M10 Service Manual

KV-13M10/MT1300/
RM-Y116 RM-Y123
KV-14R10/1460R
RM-Y116 RM-Y123
3. The CRT displays the item Being adjusted.
4. Press |1j or [4] on the Remote Commander to select
SCREEN
(RV 702) the item.
5. Press 3] or (6| on the Remote Commander to
change the data.
6. Press |MUTING] then [ENTER] to write into
FOCUS
(RV 703) memory.
Fig.10 SERVICE ADJUSTMENT MODE MEMORY
3-4. SCREEN(G 2)
emer etree
Green
1. Input a dots pattarn. Red
2. Set the PICTURE and BRIGHT controls at
minimum and COLOR control at normal.
3. Adjust BKG VRs so that voltages on the red, green
and blue cathodes are 160 V dc with an oscilloscope 7. Turn set off and on to exit.
as shown in Fig.11.
4, Observe the screen and adjust SCREEN (G2 RV
702) to obtain the faintly visible background of dot
3-6. WHITE BALANCE ADJUSTMENTS
i)
. Set to service adjustment mode.
. Set the PICTURE and BRIGHT to minimum.
. Adjust with SBRT if necessary.
. Select G CUT and B CUT with[l|and [4].
. Adjust with|3]and|6|for the best white balance.
. Set the PICTURE and BRIGHT to maximum.
. Select GAMP and BAMP with{1|and|4|
. Adjust with[3]and (6|for the best white balance.
Fig.11 10. Write into the memory by pressing |MUTING|then
[ENTER].
is)
|
160 V de pedestal
Oo ON DT GND
3-5. METHOD OF SETTING THE SERVICE
ADJUSTMENT MODE
SERVICE MODE PROCEDURE
1. Standby mode.(Power off)
2 . [ D I S P L A Y|—[5] [VOL (+)|—-[POWER] on the
Remote Commander. (Press each button within a
second.)