Multi channel surround setup
(continued)
•
Sub
woofer
selection
(SUB
WOOFER)
• If you connect
a sub wool_r,
select
"YES'.
• If you do not connect
a sub woofer,
select
"NO".
This activates
the bass redirection
circuitry
and outputs
the LFE
signals
from other
speakers.
• In order
to take full advantage
of the Dolby
Digital
bass redirection
circuitry,
we
recommend
setting
the s_b woofer's
cut off
frequency
as high as possible.
Advance
Settings
The parameters below we for the _vanced
speaker settings. They appoar in the displ_y
window
only when you set "MENU
EXPAND"
to "ON" in the CUSTOMIZE
menu (poge 44).
•
Surround
speaker position (SURR
POSL)*
This par_uneter lets you specify the location of
your surround speakers
tbr proper
implement_tion
of the DigitM Cinema Sound
surround modes. Refer to the illustration
below.
• Select
"SIDE"
if the location
of your surromld
speakers
corresponds
to section
I_.
• Select
"MIDDLE"
if the location
of your
s_rround
speakers
corresponds
to section
O.
• Select
"BEHIND"
if the location
of your
surround
speakers
corresponds
to section
O.
This
parameter
is available
only when the
surround
back speaker
size is set to "NO".
•
Surround speaker height (SURR
HEIGHT)*/Surround
back speaker
height (SURR BACK HGT.)**
This par_uneter lets you specify the height of
your surround _md surround back spoaker(s)
for
proper implementation
of the Digital Cinema
Sound surround modes. Refer to the illustr_tion
below.
• Select "LOW" if the location of your surround
speakers corresponds to section O.
• Select "HIGH" if the location of your surround
speakers corresponds to section O.
*
These parameters
are not available
when
"Surround
speaker
size (SURROUND)"
is se_ to
"NO".
** This parameter
is not available
when "Surround
back speaker
size (SURR
BACK)"
is set to "NO".
22us