Sony STR-DE985 Operating Instructions Manual page 14

CTRLS (STATUS)IN/OUT*
[]
CONTROLAIH
[]
* STR-DE985 only
CONTROL A1. hookup
• If you have a CONTROL A1 ]] compatible
Sony CD player, SACD player, tape
deck, or MD deck
Use a monaural mini-plug cord (not
supplied) to connect the CONTROL AI 1I
jack on the CD player, SACD player, tape
deck, or MD deck to the CONTROL AI 1I
jack on the receiver. Refer to "CONTROL
AI 1I control system" on page 46 and the
operating instructions supplied with your CD
player, SACD player, tape deck, or MD deck
for details.
Note
If you make CONTROL A 1II connections from
the receiver to an MD deck that is also connected
to a computer, do not operate [he l_ceiver while
using the "Sony MD Editor" software. This may
cause a malfunction.
[]
2ND ROOM OUT*
If you have a Sony CD changer with a
COMMAND MODE selector
If your CD changer's COMMAND MODE
selector can be set to CD 1, CD 2, or CD 3,
be sure to set the command mode to "CD 1"
and connect the chtmger to the CD jacks on
the receiver.
However, if you have a Sony CD ch_mger
with VIDEO OUT jacks, set the command
mode to "CD 2" and connect the ch_mger to
the VIDEO 2 j_mks on the receiver.
14 us