Ripping Audio Cd Tracks - Creative MuVo Slim User Manual

Ripping Audio
CD Tracks
Rather than manually
entering track
information, retrieve
such audio CD
information from CDDB
before ripping tracks.
Change the default
ripping format and
bitrate for higher or
lower quality audio.
See Creative
MediaSource's Help file
for details
4. Type in the new Album, Artist or Genre.
5. Click the OK button.
The first phase in making an MP3 file is extracting audio data from an audio
CD. To extract audio data, you will need a CD-ROM drive that can extract
digital audio data, and a program known as a ripper. With Creative
MediaSource Organizer, you can rip tracks from most audio CDs. This
program uses the CD-ROM drive to read the audio tracks from the audio CD
and stores it on your hard disk.
The time needed for a successful audio extraction depends on:
❍ CD-ROM drive speed
❍ defects, like scratches on the audio CD
❍ error-checking features on the CD-ROM drive
Encoding is the second phase of making an MP3 file. Encoders are used to
convert the stored audio tracks, usually WAV files, into MP3 files. MP3
encoding is considered lossy compression, which means that some data is
lost during compression. However, using the standard sampling rate and
bitrates will ensure that your MP3 files retain much of their audio quality. The
standard bitrate of most MP3 files is 128 Kbps, although some are set higher,
at 160 or 192 Kbps. Higher bitrates will result in larger MP3 file sizes, with
better audio quality. Use Creative MediaSource Organizer to extract audio
tracks and encode MP3s.
You can rip an audio CD's tracks to your player, hard disk or PC Music
Library. You can choose to rip an entire CD, or selected tracks from the audio
CD.
Using Your Software 3-6