Ripping Tracks From An Audio Cd; Transferring Tracks - Creative NOMAD JUKEBOX 3 Manual

Ripping tracks
from an audio CD
Rather than manually
entering track
information, retrieve
such audio CD
information from CDDB
before ripping tracks.
Change the default
ripping format and
bitrate for higher or
lower quality audio.

Transferring tracks

To synchronize
tracks in your music
libraries
1. Insert an audio CD into your CD-ROM drive.
If the CD starts playing, click the STOP button. You cannot rip tracks while the
CD is playing.
2. In PlayCenter's Main window, click the AUDIO CD button.
3. Click the boxes next to the tracks you want to rip.
4. To rip to your hard disk, click either the MY COMPUTER or PC MUSIC LIBRARY
buttons in the Transfer window. Note that you can configure the default
location for storing ripped tracks in PlayCenter Settings.
To rip directly to your player, click the NOMAD JUKEBOX button in the Transfer
window.
5. Click the RIP TO button. The Transfer Queue bar shows the ripping progress.
6. To preview the song that you have just ripped in PlayCenter, click the song title
and then click "Preview" on the Toolbar.
Transfer tracks to and from you player by manually selecting the tracks for transfer
or by using PlayCenter's AudioSync feature.
AudioSync is a fast and simple method for synchronizing the music libraries in your
PC and NOMAD Jukebox. To customize music library synchronization, simply select
the desired transfer modes and transfer options in PlayCenter Settings.
Your player must be properly connected to your computer before transferring
tracks, as described in "Installing Software" on page 2-5.
1. In the Main window, click the NOMAD JUKEBOX button.
2. On the Toolbar, click "AudioSync".
PlayCenter starts the AudioSync operation.
Using Applications 4-3