TP-Link Archer VX1800v User Manual page 15

Chapter 2
Turn off the Wi-Fi on your computer and connect your computer's Ethernet port to the
LAN port on the modem router via the Ethernet cable.
Method 2: Wirelessly
1 ) Find the SSID (Network Name) and Wireless Password printed on the label at
the bottom of the router.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
Computer
Connections are available
Wireless Network Connection
TP-Link_XXXX
TP-Link_XXXX_5G
Connect automatically
√
Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB
network cards, can be connected to your router through this method. (WPS is not
supported by iOS devices.)
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be
disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the
appropriate encryption before configuring the WPS.
1 ) Tap the WPS icon on the device's screen. Here we take an Android phone for
instance.
2 ) Within two minutes, press the WPS button on your modem router.
Ethernet Cable
< Settings
Wi-Fi
CHOOSE A NETWORK...
TP-Link_XXXX
Connect
TP-Link_XXXX_5G
Other...
Connect the Hardware
Smart Device
Wi-Fi
10