TP-Link Archer VX1800v User Manual page 52

Chapter 8
3. Press the WPS button of the client device directly.
4. The WPS LED of the router flashes for about 2 minutes during the WPS process.
5. When the WPS LED is on, the client device has successfully connected to the
modem router.
Method 3: Enter the modem router's PIN on your client device
Use this method if your client device asks for the modem router's PIN.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
3. Take a note of the Current PIN of the modem router. You can also click the
button to get a new PIN.
4. On the client device, enter the modem router's PIN. (The default PIN is also printed
on the label of the modem router.)
5. The WPS LED flashes for about two minutes during the WPS process.
6. When the WPS LED is on, the client device has successfully connected to the
modem router.
Note:
1. The WPS LED on the modem router will light on for five minutes if the device has been successfully added to the
network.
2. The WPS function cannot be configured if the wireless function of the modem router is disabled. Please make sure
the wireless function is enabled before configuring WPS.
> Wireless > WPS page. Switch on Enable Router's PIN.
Generate
47