Advertisement

Quick Links

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. There is no guarantee that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents here and specially disclaims
any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right
to revise this publication and to make changes to the contents here without obligation to notify any party
beforehand.
Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor's approval
in writing.
The content of this user's manual is subject to be changed without notice and we will not be responsible for
any mistakes found in this user's manual. All the brand and product names are trademarks of their respective
companies.

FCC Information and Copyright

Dichiarazione di conformità sintetica
Ai sensi dell'art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodotto è conforme
alle normative vigenti e soddisfa i requisiti
essenziali richiesti dalle direttive
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying with the
laws in force and meeting all the essential
requirements as specified by the directives
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied

Advertisement

Table of Contents
loading

Summary of Contents for Biostar BICHT-PBA

  • Page 1: Fcc Information And Copyright

    FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 2: Table Of Contents

    BIBD-PBA User’s Manual Table Of Contents FCC Information and Copyright ������������������������������������������������������������������������������� 1 Chapter 1: Introduction ������������������������������������������������������������������������������������������� 3 1.1 Before You Start .............................3 1.2 Specifications ............................4 1.3 Rear / Front Panel Connectors .......................5 1.4 Motherboard Layout ..........................6 Chapter 2: Hardware installation ����������������������������������������������������������������������������� 7 2.1 Central Processing Unit (CPU) ........................7 2.2 Jumpers / Slot / Headers / Connectors ....................7 Chapter 3: BIOS Setup �������������������������������������������������������������������������������������������...
  • Page 3: Chapter 1: Introduction

    BICHT-PBA User’s Manual Chapter 1: Introduction 1.1 Before You Start Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: •  Prepare a dry and stable working environment with sufficient lighting.
  • Page 4: Specifications

    BIBD-PBA User’s Manual 1.2 Specifications Intel® Atom™ Quad core x5-Z8350 Processor (2M Cache, up to 1.92 GHz) Integrated Intel® HD Graphics engine Dual independent displays (Extended mode) as below two: Graphic -- Integrated DVI-D -- Integrated HDMI DDR3L 1600MHz SO-DIMM / 2GB/4GB, single channel ,1.35V Main Memory *Registered DIMM or ECC DIMM is not supported 1x Built-in 32/64GB eMMC Flash Onboard...
  • Page 5: Rear / Front Panel Connectors

    BICHT-PBA User’s Manual 1.3 Rear / Front Panel Connectors Rear Front J1: DC-12V IN Power Jack Chapter 1: Introduction | 5...
  • Page 6: Motherboard Layout

    BIBD-PBA User’s Manual 1.4 Motherboard Layout »  »  represents the 1st pin. 6 | Chapter 1: Introduction...
  • Page 7: Chapter 2: Hardware Installation

    BICHT-PBA User’s Manual Chapter 2: Hardware installation 2.1 Central Processing Unit (CPU) The mainboard includes an Intel® Celeron processor, and a cooler has been installed to provide sufficient cooling. 2.2 Jumpers / Slot / Headers / Connectors M2_2: Half-size mPCIe Slot...
  • Page 8 BIBD-PBA User’s Manual Jumper Setting The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened Pin closed Pin 1-2 closed JCMOS1: Clear CMOS Jumper Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and the CMOS data.
  • Page 9 BICHT-PBA User’s Manual F_USB2: USB 2.0 Connectors This header allows you to connect additional USB 2.0 port. Pin Assignment USB_VCC USB_VCC JSPK1/2: Audio Connector Left Speaker (JSPK1) Pin Assignment SPKRP SPKPN Right Speaker (JSPK2) Pin Assignment SPKLP SPKLN JCOM1/2/3/4: COM Port Connector...
  • Page 10 BIBD-PBA User’s Manual PWRBTN: Power Button Pin Assignment PWRBTN ANT4: WIFI+BT Antenna 10 | Chapter 2: Hardware installation...
  • Page 11: Chapter 3: Bios Setup

    BICHT-PBA User’s Manual Chapter 3: BIOS Setup Introduction The purpose of this manual is to describe the settings in the AMI UEFI BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to NVRAM.
  • Page 12: Main Menu

    BIBD-PBA User’s Manual 3�1 Main Menu Once you enter AMI UEFI BIOS Setup Utility, the Main Menu will appear on the screen providing an overview of the basic system information. BIOS Information Shows system information including UEFI BIOS version, model name, marketing name, built date, etc. Total Memory Shows system memory size, VGA shard memory will be excluded.
  • Page 13: Advanced Menu

    BICHT-PBA User’s Manual 3.2 Advanced Menu The Advanced Menu allows you to configure the settings of CPU, Power Management, and other system devices. Note »  » Beware of that setting inappropriate values in items of this menu may cause system to malfunction. »  » The options and default settings might be different by RAM or CPU models. ACPI Settings Enable ACPI Auto Configuration This item enables or disables BIOS ACPI auto configuration function.
  • Page 14 BIBD-PBA User’s Manual Enable Hibernation This item enables or disables system ability to hibernate (0S/S4 sleep state). This option may be not effective with some 0Ss. Options: Enabled (Default) / Disabled ACPI Sleep State This item selects the highest ACPI sleep state the system will enter when the SUSPEND button is pressed. Options: Suspend Disabled (Default) Lock Legacy Resources The item enables or disables Lock of Legacy Resources.
  • Page 15 BICHT-PBA User’s Manual CPU Thermal Configuration This item Enabled or Disable Digital Thermal Semsor. Options: Disabled (Default) / Enabled Limit CPUID Maximum This item disabled for Windows XP. Options: Disabled (Default) / Enabled Bi-directional PROCHOT When a processor thermal sensor trips (either core), the PROCHOT# will be driven. If bi-direction is enabled, external agents can drive PROCHOT# to throttle the processor.
  • Page 16 BIBD-PBA User’s Manual Offboard SATA Controller Configuration SDIO Configuration SDIO Access Mode This item allows you to control the SDIO Access Mode. Auto Option: Access SD device in DMA mode if controller supports it, otherwise in PIO mode. DMA Option: Access SD device in DMA mode. PIO Option: Access SD device in PIO mode.
  • Page 17 BICHT-PBA User’s Manual USB Configuration XHCI Hand-Off This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by EHCI driver. Options: Enabled (Default) / Disabled USB Mass Storage Driver Support This item enable/disable USB Mass Storage Driver Support.
  • Page 18 BIBD-PBA User’s Manual Platform Trust Technology fTPM This item enable/disable fTPM. Options: Disabled (Default) / Enabled 18 | Chapter 3: BIOS Setup...
  • Page 19: Chipset Menu

    BICHT-PBA User’s Manual 3�3 Chipset Menu This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components.
  • Page 20 BIBD-PBA User’s Manual Intel IGD Configuration GOP Driver This item enable GOP Driver will unload VBIOS, disbale it will load VBIOS. Options: Enabled (Default) / Disabled Integrated Graghics Device This item enable/disable Integrated Graghics Device. Options: Enabled (Default) / Disabled IGD Turbo Enable This item select the IGD Turbo feature, if Auto selected, IGD Turbo will only be enabled when SOC stepping is B0 or above.
  • Page 21 BICHT-PBA User’s Manual Graphics Power Management Control Max TOLUD This item sets Maximum Value of TOLUD. Options: 2 GB (Default) / Dynamic /1 GB / 1.25 GB / 1.5 GB / 1.75 GB / 2.25 GB / 2.5 GB / 2.75 GB / 3 GB...
  • Page 22 BIBD-PBA User’s Manual Audio Configuration LPE Audio Support This item select LPE Audio ACPI mode or PCI mode. Options: LPE Audio ACPI mode (Default) / Disabled / LPE Audio PCI mode USB Configuration Force USB OTG Mode This item Force USB Mode. Options: Host (DFP) (Default) / Slave (UDP) USB OTG Support This item enable/disable USB OTG Support.
  • Page 23 BICHT-PBA User’s Manual XHCI Mode This item Mode of operation of XHCI Controller. Options: Enabled (Default) / Auto / Disabled / Smart Auto USB 2.0(EHCI) Support Options: Disabled (Default) USB2 Port 1/2/3 This item enable/disable USB Port 1/2/3 Options: Enabled (Default) / Disabled...
  • Page 24 BIBD-PBA User’s Manual eMMC RX DLL Tuning Support This item enable/disable eMMC RX DLL Tuning Support. Options: Disabled (Default) / Enabled eMMC Driver Operating Mode This item selects the operating frequency in eMMC Driver. Options: Up to 52 MHz (Default) / Auto Detect / Up to 26 MHz / Basic Frequency SCC SDIO Mode for WIFI This item selects SDIO mode for WIFI.
  • Page 25 BICHT-PBA User’s Manual MRD Front Camera Selection This item select MRD Front Camera Device. Options: OV2680 (Default) / GC0310 MRD Rear Camera Selection This item select MRD Front Camera Device. Options: OV8858 (Default) / HM5040 This item enable/disable GPS. Options: Enabled (Default) / Disabled...
  • Page 26 BIBD-PBA User’s Manual [PCI Express Port 1/2/3/4] - SEFE This item enable/disable Root PCI Express System Error on Fatal Error. Options: Disabled (Default) / Enabled [PCI Express Port 1/2/3/4] - SENFE This item enable/disable Root PCI Express System Error on Non-Fatal Error. Options: Disabled (Default) / Enabled [PCI Express Port 1/2/3/4] - SECE This item enable/disable Root PCI Express System Error on Correctable Error.
  • Page 27 BICHT-PBA User’s Manual PCI Express S0ix Settings PCIe S0ix This item enable/disable S0ix for PCIe. Options: Enabled (Default) / Disabled D0 S0ix Policy This item PCIe D0 S0ix Policy. Options: PCIe RC is in D0 when entering S0IX (Default) / PCIe RC shall be in D3 / S0i1 is the deepest S0ix...
  • Page 28 BIBD-PBA User’s Manual Onboard Device Onboard WIFI This item Onboard WIFI Control. Options: Enabled (Default) / Disabled Onboard Bluetooth This item Onboard Bluetooth Control. Options: Enabled (Default) / Disabled 28 | Chapter 3: BIOS Setup...
  • Page 29: Security Menu

    BICHT-PBA User’s Manual 3.4 Security Menu Administrator Password This item sets Administrator Password. User Password This item sets User Password. Secure Boot menu Secure Boot Secure Boot can be enabled if 1. System running in user mode with enrolled Platform(PK) 2. CSM function is disabled.
  • Page 30 BIBD-PBA User’s Manual Key Management Provision Factory Defaults Keys Allow to install factory default Secure Boot Keys when system is in setup mode. Options: Disabled (Default) / Enabled Enroll all Factory Default keys Force System to User Mode - install all Factory Default Keys(PK, KEK, db, dbt, dbx). Change takes effect after reboot.
  • Page 31: Boot Menu

    BICHT-PBA User’s Manual 3.5 Boot Menu This menu allows you to setup the system boot options. Setup Prompt Timeout This item sets number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Options: 2 (Default) Bootup NumLock State This item selects the keyboard NumLock state.
  • Page 32 BIBD-PBA User’s Manual USB Support If Disabled, all USB devices will NOT be available until after OS boot. If Partial Initial, USB Mass Storage and specific USB port/device will NOT be available before OS boot. If Enabled, all USB devices will be available in OS and Post. Options: Partial Initial (Default) / Disabled / Full Initial PS2 Devices Support If Disabled, PS2 devices will be skipped.
  • Page 33: Exit Menu

    BICHT-PBA User’s Manual 3.6 Exit Menu This menu allows you to load the optimal default settings, and save or discard the changes to the BIOS items. Save Changes and Reset Reset the system after saving the changes. Discard Changes and Exit Abandon all changes made during the current session and exit setup.

Table of Contents