Service Work On The Chassis; Raising The Motorcycle With The Lift Stand; Removing The Motorcycle From The Lift Stand; Bleeding The Fork Legs - KTM 250 SX-F EU 2011 Owner's Manual

SERVICE WORK ON THE CHASSIS

Raising the motorcycle with the lift stand

10.1
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.

Removing the motorcycle from the lift stand

10.2
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.

Bleeding the fork legs

10.3
–
Raise the motorcycle at the frame underneath the engine.
The wheels must no longer touch the ground.
–
Secure the motorcycle against falling over.
Lift stand (54829055000)
100913-01
(All SX‑F models)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
spindle.
Info
Remove the plug-in stand before starting on a trip.
100950-10
(XC‑F)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with
the rubber band.
101084-10
–
Raise the motorcycle with the lift stand. (
–
Remove bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Mount and tighten bleeder screws.
–
Remove the motorcycle from the lift stand. (
B00296-10
into the left side of the wheel

to the ground with your foot and

p. 32)
briefly.

p. 32)
32