Tripp Lite APS 1024 INT Owner's Manual page 17

Specifications
HARDWIRED MODELS:
Series Number:
Weight:
Regulatory Approval:
INVERTER
Continuous power (@ 20° C):
Surge power (5 seconds):
Efficiency (Full Load):
Minimum/Maximum DC Fuse Rating:
DC Input Current @ Nominal V DC
Full Load
No Load
Nominal Input Volts:
DC Input Voltage Range:
Nominal Output Volts:
Nominal Output Frequency:
BATTERY CHARGER
Charging Capacity DC:
Acceptance Volts VDC:
Float Volts VDC (w/gel):
Input Voltage AC:
Input Current AC:
LINE VAC OPERATION
Minimum Input AC Volts:
Maximum Input AC Volts
(Continuous, Charger at Maximum):
Maximum Input Current
(Continuous, Charger at Maximum):
Input Frequency:
Maximum Output AC (Continuous)
Automatic Transfer Time:
* Load sense can reduce this to 1/30 of the listed current. ** Factory default setting. .
(Hardwired Models)
APS2012UL
AGAP200012MV2
38.8 lbs.
UL458
2000 W
4000 W
87%
300A/500A
192 A
2.5 A*
12 VDC:
10-15 VDC
120 VAC ±5%
60 Hz ±.3%
20 A**
Selectable
14.4 V**/14.2 V Wet**/Gel
13.3 V (13.6 V)
120 V
4.2 A**
Selectable 75**,85, 95, or 105 VAC
Selectable 135** or 145 VAC
29 A
60 Hz ±10%
16.7 A
4-6 ms
17