Optional Add-On Units; O-Ring Seal - Siemens SIMOTICS XP 1MB 1 Series Operating Instructions Manual

Maintenance
9.3 Corrective maintenance
9.3.12

Optional add-on units

You can find additional operating instructions here: AUTOHOTSPOT
9.3.13

O-ring seal

If O-ring seals are present, you should check that they are in perfect condition and that the O-ring
seals are properly seated in the grooves between the components. Replace damaged O-ring
seals.
O-ring seals can be present on the following components, for instance:
• Adapters, tapers
• Entries, glands
• Bearing seals
• End shield seals
• Terminal box sealing
• etc.
136
1MB..1/2/3/4 - shaft heights 63 ... 355
Operating Instructions, 11/2023, A5E52779900A