Maintenance
9.3 Corrective maintenance
9.3.7
Links
• Replace any corroded screws.
• Take care not to damage the insulation of live parts.
• Document the position of any rating and supplementary plates that have been removed.
• Avoid damaging the centering edges.
9.3.8
Reassembly: Miscellaneous information
• Position all rating and supplementary plates as in the original state.
• Where relevant, fix electric cables.
• Check the tightening torques of all screws, as well as those of screws that have not been
released.
9.3.9
Optional add-on units
Note
Further documents
Observe all of the other documents provided with this motor.
You can find additional operating instructions here:
Further documents (Page 248)
9.3.10
O-ring seal
If O-ring seals are present, you should check that they are in perfect condition and that the O-
ring seals are properly seated in the grooves between the components. Replace damaged O-
ring seals.
O-ring seals can be present on the following components, for instance:
• Adapters, tapers
• Entries, glands
• Bearing seals
• End shield seals
• Terminal box sealing
234
1LE8 轴高 80 ... 355
操作说明, 11/2022, A5E52373573A