Table of Contents
Advertisement
6.1.6
ISED
This device is declared by Siemens Canada Ltd. to meet the requirements of the
following ISED (Innovation Science and Economic Development Canada) standard:
•
6.1.7
ISO
This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
•
6.1.8
ACMA
This device meets the requirements of the following Australian Communications and
Media Authority (ACMA) standards under certificate ABN 98 004 347 880:
•
•
•
•
The device is marked with an RCM symbol to indicate compliance when sold in the
Australian region.
A copy of the Declaration of Conformity is available via Siemens Industry Online
Support at https://support.industry.siemens.com/cs/ww/en/view/89855782.
6.1.9
RoHS
This device is declared by Siemens Canada Ltd. to meet the requirements of the
following RoHS (Restriction of Hazardous Substances) directives for the restricted use
of certain hazardous substances in electrical and electronic equipment:
RUGGEDCOM RX5000
Equipment Manual, 11/2023, C79000-G8976-1058-15
CAN ICES-3 (A)/NMB-3 (A)
ISO 9001:2015
Quality management systems – Requirements
Radiocommunications (Compliance Labeling – Devices) Notice 2014 made under
section 182 of the Radiocommunications Act 1992
Radiocommunications Labeling (Electromagnetic Compatibility) Notice 2017
made under section 182 of the Radiocommunications Act 1992
Radiocommunications (Compliance Labeling – Electromagnetic Radiation) Notice
2014 made under section 182 of the Radiocommunications Act 1992
Telecommunications (Labeling Notice for Customer Equipment and Customer
Cabling) Instrument 2015 made under section 407 of the Telecommunication
Act 1997
Certification
6.1.6 ISED
49
Advertisement
Table of Contents
