Ussd - TP-Link TL-MR105 User Manual

Chapter 11
solution for networks that do not support native dual-stack, where both IPv6 and IPv4
run independently.
1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2 Go to Advanced
3 Enable IPv6 Tunnel.
4 Specify a tunneling mechanism and select a WAN connection.
5 Save the settings.
11 9

USSD

Unstructured Supplementary Service Data (USSD) is a technology that allows you to
communicate with your service provider using short codes. It usually consists of a
number that starts with * and ends with #. You can query various services on this page.
1 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2 Go to Advanced
3 Enter the USSD request supported by the carrier and click Send. You will see the
message returned from the carrier in the USSD Result box.
> Network> IPv6 Tunnel.
> Network> USSD.
Specify Your Network Settings
63