TP-Link TL-MR105 User Manual page 65

Chapter 11
shown in the following figure so that the physical connection between my PC and my
company's server is achieved. To surf the internet and visit my company's network at
the same time, I need to configure the static routing.
How can I do that?
1 Make sure the routers use different LAN IP addresses on the same subnet. Disable
DHCP function of Router 2.
2 Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set
for the router.
3 Go to Advanced
4 Click Add to add a new static routing entry. Finish the settings according to the
following explanations:
4G LTE router
LAN: 192.168.1.1
192.168.1.100
> Network > Static Routing.
Specify Your Network Settings
Router 2
WAN: 172.30.30.100
LAN: 192.168.1.2
Switch
My PC
Company's server
172.30.30.1
61