Table of Contents
Advertisement
Unit Start-up
☐ Press the SETUP key. The LCD screen will display
various preset "parameters of operation" based on the
unit type, size, and the installed options. Compare the
factory preset information to the specified application
requirements. If adjustments are required, follow the
step-by-step instructions provided in the appropriate
programming manual for VAV applications.
☐ Inspect the unit for misplaced tools, hardware, and
debris.
126
☐ Press the AUTO key to begin system operation. The
system will start automatically once the dampers
modulate and a request for either heating or cooling
has been given.
☐ Verify that all exterior panels including the control panel
doors and condenser grilles are secured in place.
RT-SVX072D-EN
Advertisement
Table of Contents
