Media Specific Adjustments - Canon varioPRINT 6000 TITAN Series Manual

Canon

14.2 Media Specific Adjustments

The media specific adjustments are for customers who want to precisely adjust the
image position due to the type of media.
The following settings can be manually adjusted through the Settings Editor >
Media > select a registered media type > Registration icon. The Settings Editor can
only be accessed via a Web browser using the IP address of the varioPRINT 6000
TITAN Series.
The IP address of the varioPRINT 6000 TITAN Series is found on the machine's
operator panel through System > Local key operator settings > Connectivity >
TCP/IP address.
The table below describes the Edit media registration settings and each setting's
description.
Setting
X elongation (0.1 ‰)
X image shift front (0.01 inches)
Z image shift front (0.01 inches)
X image shift back (0.01 inches)
Z image shift back (0.01 inches)
Revision 4 varioPRINT 6000 TITAN Series Customer Expectations Document
varioPRINT 6000 TITAN Series Customer Expectations Document
Make a fine adjustment to the image size from the feed direction
(From ±250% in 0.01% increments)
Make a fine adjustment to enable printing with the correct
alignment of the image from the leading edge of the paper in the
feed direction on the front side.
(From ±500 mm in 0.1 mm increments)
Make a fine adjustment to enable printing with the correct
alignment of the image from the side edge of the paper
perpendicular to the feed direction on the front side.
(From ±500 mm in 0.1 mm increments)
Make a fine adjustment to enable printing with the correct
alignment of the image from the leading edge of the paper in the
feed direction on the back side.
(From ±500 mm in 0.1 mm increments)
Make a fine adjustment to enable printing with the correct
alignment of the image from the side edge of the paper
perpendicular to the feed direction on the back side.
(From ±500 mm in 0.1 mm increments)
Description
Page 64