Table of Contents
Advertisement
Canon
6.7 PrintGuard IV
Item
Type
Number of Units
Required
Media Sizes and
Weights
Power Source
Dimensions
(W x D x H)
Weight
NOTE
PrintGuard IV is not supported in configurations with the Media Enhancement
Module.
42 The fuser path does not support coated, tab, or die cut media.
Revision 4
varioPRINT 6000 TITAN Series Customer Expectations Document
varioPRINT 6000 TITAN Series Customer Expectations Document
Post fuser
Two (For the TP and MICR machines only)
LTR, LGL, 11" x 17", and variable sizes (8" x 8.3" to 12" x 19.2"
(203 mm x 210 mm to 305 mm x 488 mm))
18 to 24 lb bond (70 to 90 g/m
Only plain paper supported (No tabs or die cuts)
Fuser Path
42
: Minimum: 8" x 8.3" (203 mm x 210 mm)
Maximum: 19.2" x 12" (488 mm x 305 mm)
Bypass:
50 g/m
2
to 300 g/m
Two 115V AC 20A Single Phase lines
29.5" x 33.5" x 47.2" (750 mm x 850 mm x 1,200 mm)
Approximately 392 lb (178 kg)
Specifications
2
)
2
(approved media only).
Page 37
Advertisement
Table of Contents
