Media Specific Adjustments - Canon varioPRINT 110 Customer Expectation Document

16.2 Media Specific Adjustments

The media specific adjustments are for customers who want to precisely adjust the
image quality per paper type that is registered in the machine.
The following settings can be manually adjusted through the Settings Editor >
Media > select a registered media type > Registration icon. The Settings Editor can
only be accessed via a Web browser using the IP address of the Canon
varioPRINT 110.
The IP address of the Canon varioPRINT 110 is found on the machine's operator
panel through System > Local key operator settings > Connectivity > TCP/IP
address.
The table below describes the Edit media registration settings and each setting's
description.
Setting
X image shift front (0.01 inches)
X image shift back (0.01 inches)
Z image shift front (0.01 inches)
Z image shift back (0.01 inches)
X offset (0.01 inches)
Z offset (0.01 inches)
X elongation front (0.1%)
X elongation back (0.1%)
S adjust (0.01 inches)
Trapezoid (0.01 inches)
Diamond shape adjust (0.01 inches)
Version 13
Make a fine adjustment to enable printing with the correct alignment of
the image from the leading edge of the paper in the feed direction on the
front side.
(From ±500 mm in 0.1 mm increments)
Make a fine adjustment to enable printing with the correct alignment of
the image from the leading edge of the paper in the feed direction on the
back side.
(From ±500 mm in 0.1 mm increments)
Make a fine adjustment to enable printing with the correct alignment of
the image from the side edge of the paper perpendicular to the feed
direction on the front side.
(From ±500 mm in 0.1 mm increments)
Make a fine adjustment to enable printing with the correct alignment of
the image from the side edge of the paper perpendicular to the feed
direction on the back side.
(From ±500 mm in 0.1 mm increments)
Make a fine adjustment to the margin of the image from the leading edge
of the paper in the feed direction.
(From ±25 mm in 0.1 mm increments)
Make a fine adjustment to the margin of the image from the side edge of
the paper perpendicular to the feed direction.
(From ±25 mm in 0.1 mm increments)
Make a fine adjustment to the image size from the feed direction on the
front side.
(From ±250% in 0.01% increments)
Make a fine adjustment to the image size from the feed direction on the
back side.
(From ±250% in 0.01% increments)
Make a fine adjustment to the image to straighten out a skewed image.
(From ±25 mm in 0.1 mm increments)
Make a fine adjustment to the image to straighten out a trapezoidal
image.
(From ±25 mm in 0.1 mm increments)
Make a fine adjustment to the image to straighten out a diamond-shaped
image.
(From ±25 mm in 0.1 mm increments)
varioPRINT 110 Customer Expectations Document
varioPRINT 110 Customer Expectations Document
Description
Page 66