Constant Settings; Surfing; Viewing Tide Information - Garmin INSTINCT 2X Owner's Manual

Constant Settings

Select Jumpmaster, select a jump type, and select Constant.
Percent Max.: Sets the jump range for all jump types. A setting less than 100% decreases the drift distance to
the DIP, and a setting greater than 100% increases the drift distance. More experienced jumpmasters may
want to use smaller numbers, and less experienced skydivers may want to use larger numbers.
Safety Factor: Sets the margin of error for a jump (HAHO only). Safety factors are usually integer values of two
or greater, and are determined by the jumpmaster based on specifications for the jump.
K-Freefall: Sets the wind drag value for a parachute during freefall, based on the parachute canopy rating (HALO
only). Each parachute should be labeled with a K value.
K-Open: Sets the wind drag value for an open parachute, based on the parachute canopy rating (HAHO and
HALO). Each parachute should be labeled with a K value.
K-Static: Sets the wind drag value for a parachute during a static jump, based on the parachute canopy rating
(Static only). Each parachute should be labeled with a K value.

Surfing

NOTE: This feature is only available on Instinct 2 - Surf Edition models.
You can use the surfing activity to record your surfing sessions. After your session, you can view the number of
waves, longest wave, and maximum speed.
1 From the watch face, press GPS.
2 Select Surf.
3 Wait on the beach until your watch acquires GPS signals.
4 Press GPS to start the activity timer.
5 After you complete your activity, press GPS to stop the activity timer.
6 Select Save to review the summary of your surfing session.

Viewing Tide Information

Tide information is for information purposes only. It is your responsibility to heed all posted water-related
guidance, to remain aware of your surroundings, and to use safe judgment in, on, and around the water at all
times. Failure to heed this warning could result in serious personal injury or death.
NOTE: This feature is only available on Instinct 2 - Surf Edition models.
When you pair your watch with a compatible phone, you can view information about a tide station, including the
tide height and when the next high and low tides will occur.
1 From the watch face, press GPS.
2 Select Tides.
Activities and Apps
WARNING
23