Connecting To The Browser Interface - Agilent Technologies 8860 Installation And First Startup

1 Installing the GC

Connecting to the Browser Interface

To connect to the GC using a browser:
1 If you do not know the GC's IP address or host name, use the touchscreen to find it.
2 Open a web browser. Supported browsers include Chrome, Safari (on a tablet), Internet
3 Enter http://xxx.xx.xx.xxx, where xxx.xx.xx.xxx is the GC's IP address. (If
10
Explorer 11, and Edge. Make sure the browser version is up to date.
using a host name, enter it instead.) In this example, the GC IP address is 10.1.1.101.
Accessing the Browser Interface only requires that the tablet or computer be connected to
the same gateway as the GC; no internet connection is required.
LAN switch or hub
LAN cable
http://10.1.1.101
8860 GC
http://XXX.XX.XXX.XX
Browser Interface
Installation and First Startup