Table of Contents
Advertisement
Service doors
Description
Main service door (included in Plastics Kit)
Drive service door (included in Hard Drive Hardware Kit)
The bottom of the computer has two service doors. The drive service door only provides access to the hard
drive. The main service door provides access to the memory modules, wireless module, M.2 solid-state drive,
and keyboard screws.
Before removing the service doors, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Place the computer in "Battery Safe mode"
3.
Disconnect all external devices connected to the computer.
4.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
Remove the service doors:
Main service door
1.
Loosen the captive Phillips screw (1).
2.
Lift the bottom of the door upward (2), and then remove the door from the computer (3).
Drive service door
3.
Loosen the captive Phillips screw (1).
28
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
(Battery Safe mode on page
Spare part number
L01084-001
L01083-001
27).
Advertisement
Table of Contents
