Table of Contents
Advertisement
3.
Lift the top of the keyboard upward, and then rotate the keyboard until it rests on the palm rest.
NOTE:
prematurely pull the cables out of the system board connector(s).
4.
If applicable, disconnect the backlight cable by lifting the ZIF connector latch (1), and then disconnect
the cable from the system board (2).
5.
Disconnect the keyboard cable by lifting the reverse ZIF connector latch (3), and then disconnect the
keyboard cable from the system board (4).
38
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
A cable (or cables) connect the bottom of the keyboard to the system board. Make sure not to
Advertisement
Table of Contents
