Table of Contents
Advertisement
Service doors
Description
Main service door (included in Plastics Kit)
Hard drive service door (included in Hard Drive Hardware Kit)
The bottom of the computer has two service doors. The hard drive service door only provides access to the
hard drive. The main service door provides access to the memory modules, wireless modules, M.2 solid-state
drive, and keyboard screws.
Before removing the service doors, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Place the computer in "Battery Safe mode"
3.
Disconnect all external devices connected to the computer.
4.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
Remove the service doors:
1.
Main service door
Loosen the captive Phillips screw (1).
2.
Lift the bottom of the door upward (2), and then remove the door from the computer (3).
32
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
(Battery Safe mode on page
Spare part number
905703-001
905708-001
31).
Advertisement
Table of Contents
