HP ZHAN 66 Pro G1 Maintenance And Service Manual page 79

Hide thumbs Also See for ZHAN 66 Pro G1:

Table of Contents

13.

If it is necessary to remove or replace the HD camera, disconnect the cable from the camera (1), and

then peel the camera module up to remove it from the adhesive that secures it to the enclosure (2) .

14.

If it is necessary to remove or replace the HD display/camera cable, remove the cable from under the tab

that secures it to the enclosure (1), and then remove the cable from the display enclosure (2).

Reverse this procedure to reassemble the touch display assembly.

Component replacement procedures

Table of Contents