Toshiba Tecra M5 User Manual page 57

If no memory slot is available, you must remove a module by
NOTE
performing steps
page
If your system has the memory modules stacked on top of one
NOTE
another, you must remove the top module first before
removing/installing the bottom module.
11 Pick up the memory module by its sides, avoiding any
contact with its connector. Position the module toward
the socket, aligning the connector's notch with the
matching key in the socket.
notch
latch
key
(Sample Illustration) Aligning the memory module with the socket
12 Firmly press the memory module into the memory slot's
socket at approximately a 30-degree angle (to the
horizontal surface of the computer).
(Sample Illustration) Inserting the memory module into the
socket
Adding memory (optional)
2-3
59.
Getting Started
of "Removing a memory module" on
connector
latch
57