Directing The Display Output When You Turn On The Computer - Toshiba Tecra M5 User Manual

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
1 Press
2 While holding down
setting you want takes effect. Briefly pause each time you
press the
This hot key cycles through the settings in the following
order:
❖
Built-in display panel only
❖
Built-in display panel and external monitor
simultaneously
❖
External monitor only
❖
Built-in display panel and TV simultaneously
❖
TV only
❖
Built-in display panel and external monitor extended
❖
Built-in display panel and TV extended
(Sample Image) Display options window
3 Release the
Using external display devices
and simultaneously.
Fn F5
key to allow time for the display to change.
F5
key.
Fn
Getting Started
, press repeatedly until the
Fn F5
79
+ ):
Fn F5