7-2.5. Password - Clover LCD2084 Instruction Manual

7-2.5. PASSWORD

▫ ON/OFF
Select ON or OFF by clicking the mouse.
If the ON is selected, the password has to be entered to get into the SETUP mode,
RECORD mode, COPY mode, REPLAY mode, and when trying to connect the network
through the DVR Master.
▫ PASSWORD CHANGE
Click the password "********" button and then the On Screen Keyboard will be displayed as
shown in [Fig. 7-20]. The factory default password is "11111111".
Delete the existing password with the
new password by using the On Screen Keyboard and click the OK button to save.
The password should be 8 digits.
If you executed the factory default setting, the existing password will be changed to
"11111111".
Don't forget the password.
Note:
button on the On Screen Keyboard. Enter the
[Fig. 7-20 PASSWORD KEYBOARD window]
87
7. Setup