h. Fingerprint reader FFC
i.
Power button FFC from the system board
Next steps
1. Install the
display
assembly.
2. Install the heatsink.
3. Install the
system
fan.
4. Install the
memory
5. Install the SSD.
6. Install the WLAN.
7. Install the battery.
8. Install the
base
cover.
9. Install the
SD
card.
10. Follow the procedure in
Removing the system board - Cirrus Logic audio
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the WLAN.
6. Remove the SSD.
7. Remove the
hard drive
8. Remove the
memory
9. Remove the
system
fan.
10. Remove the heatsink.
NOTE:
The system board can be removed along with the heat sink.
11. Remove the
display
assembly.
72
Disassembly and reassembly
after working inside your
before working inside your
assembly.
computer.
computer.