Table of Contents
Advertisement
●
Messages List
The meanings of the main messages appearing on the screen are described below.
Messages
"Your current setting will be lost, if you perform "Auto
Screen Adjust". Do you continue?"
"Your current setting will be lost, if you perform "Auto
Range Adjust". Do you continue?"
"Your current color data will be lost."
"If the field rate is changed, no picture may be displayed on
screen. Do you change the setting?"
"If the USB setting is changed, the USB connection to the
selected PC will be lost. Do you change the setting?"
"The power will turn off soon. To cancel Off Timer, touch
the slide bar."
"All settings except for the field rate and USB are reset."
"Volume adjust does not support this sound signal."
(for VIDEO 1/VIDEO 2 input signal)
40
Chapter 4 Troubleshooting
Description
Appears when performing [Auto Screen Adjust].
Appears when performing [Auto Range Adjust].
Appears when performing <Reset> in the <Color> menu.
Returns the color mode setting currently selected to the
default settings.
Appears when changing the settings of [Field Rate].
Appears when changing the settings of [USB].
• Do not change the settings in the following cases.
- When connecting a memory device such as a USB
memory to the monitor
The data may be lost and damaged. Be sure to change
the USB setting after removing the memory device.
- When an application such as a sound playback, etc.
works
The sound may not output if the setting is returned to
the original. Be sure to change the USB setting after
exiting from the application.
Appears on the display from one minute before the power
turns off to the power-off time when the Off Timer is set.
Touching the slide bar while the message appears will
release the Off Timer setting and the message disappears.
Appears when performing [Reset] in the Setting menu. Set
all the settings except for [Field Rate], [USB] and [Volume]
to the default settings.
Appears when selecting <Volume> menu or performing
the shortcut menu of the volume while receiving the sound
signal not corresponding to the monitor. In this case, no
sound is output.
Advertisement
Table of Contents
