Schumacher SPI PRO 16A Manual page 5

4A LI
8A LI
16A LI
LI
RECON
4A-8A-16A
AGM
After selecting the appropriate 12volt function the charging process starts auto-
matically after 5 seconds.
For 24V batteries the following charging parameters can be selected via the
"Function» button:
4A STD
8A STD
4A AGM
8A AGM
After selecting the appropriate 24volt function the charging process starts auto-
matically after 5 seconds.
Additional battery charger functionallity can be selected using the mode button
as follows.
• For charging 12V 5Ah to 80Ah batteries
• Maintenance for 12V 5Ah to 120Ah batteries
• Suitable for charging lithium batteries: LiFePO4 (do not charge other types of
lithium batteries)
• For charging 12V 50Ah to 160Ah batteries
• Maintenance for 12V 50Ah to 250Ah batteries
• Suitable for charging lithium batteries: LiFePO4 (do not charge other types of
lithium batteries)
• For charging 12V 90Ah to 360Ah batteries
• Maintenance for 12V 90Ah to 550Ah batteries
• Suitable for charging lithium batteries: LiFePO4 (do not charge other types of
lithium batteries)
Lithium batteries are equipped with a BMS that in some cases can prevent the start
of the charging cycle; in this scenario to activate the charge process Press and hold
the "Function» button for 5 seconds, after setting the charger in lithium mode.
The RECONDITION mode is for WET and AGM batteries that have long been inactive
and have an acid stratification. Caution: due to the high voltage that is reached
during this charging cycle, recovery must be carried out with battery removed from
the vehicle. A battery recovery connected to the vehicle could cause damage to the
on-board electronics. (Only in 12V mode)
• For charging 24V 5Ah to 80Ah batteries
• Maintenance for 24V 5Ah to 120Ah batteries
• Suitable for charging WET and Gel batteries
• For charging 24V 50Ah to 160Ah batteries
• Maintenance for 24V 50Ah to 250Ah batteries
• Suitable for charging WET and Gel batteries
• For charging 24V 5Ah to 80Ah batteries
• Maintenance for 24V 5Ah to 120Ah batteries
• Suitable for charging AGM-START&STOP and AGM-SPIRAL and EFB batteries
• For charging 24V 50Ah to 160Ah batteries
• Maintenance for 24V 50Ah to 250Ah batteries
• Suitable for charging AGM-START&STOP and AGM-SPIRAL and EFB batteries
EN