11
SERVICE WORK ON THE CHASSIS
11.10
Installing the lower triple clamp
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount upper steering head
bearing
1
–
Check whether upper steering head seal
–
Push on protective ring
602666-11
–
Position the upper triple clamp with the handlebar.
–
Mount nut
H00152-11
–
Position the fork legs.
Bleeder screws
Info
The upper milled groove in the fork leg must be flush with the upper edge of
the upper triple clamp.
H01162-12
–
Tighten screws
Guideline
Screw, bottom triple clamp
V00230-10
–
Tighten nut
Guideline
Nut, steering stem
V00231-10
p. 88)
.
3
.
4
, but do not tighten it yet.
5
are positioned toward the front.
6
.
4
.
2
is correctly positioned.
M8
15 Nm
(11.1 lbf ft)
M20x1.5
10 Nm (7.4 lbf ft)
35