Related Manuals for Datalogic DS2200-1110
Summary of Contents for Datalogic DS2200-1110
- Page 1 (217) 352-9330 | Click HERE Find the Datalogic / EMS DS2200-1110 at our website:...
- Page 2 DS2200 Reference Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 3 ALL RIGHTS RESERVED Datalogic reserves the right to make modifications and improvements without prior notification. Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material.
-
Page 4: Table Of Contents
CONTENTS REFERENCES ..................... v Conventions ....................v Reference Documentation ................v Services and Support..................v SAFETY PRECAUTIONS................vi Laser Safety....................vi Power Supply....................vii CE Compliance ................... viii FCC Compliance..................viii GENERAL VIEW ..................ix GUIDE TO INSTALLATION ................. x INTRODUCTION ..................1 Product Description.................. - Page 5 3.3.1 Raster ......................20 Reading Diagrams ..................21 MAINTENANCE ..................23 Cleaning...................... 23 TECHNICAL FEATURES ................24 GLOSSARY....................26 INDEX ......................30 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 6: References
REFERENCE DOCUMENTATION For further details refer to the WinHost Help On Line. SERVICES AND SUPPORT Datalogic provides several services as well as technical support through its website. Log on to www.automation.datalogic.com and click on the links indicated for further information including:... -
Page 7: Safety Precautions
SAFETY PRECAUTIONS LASER SAFETY The following information is provided to comply with the rules imposed by international authorities and refers to the correct use of the DS2200 scanner. Standard Regulations This scanner utilizes a low-power laser diode. Although staring directly at the laser beam momentarily causes no known biological damage, avoid staring at the beam as one would with any very strong light source, such as the sun. -
Page 8: Power Supply
This product conforms to the applicable requirements of 21CFR1040 at the date of manufacture. DATALOGIC S.p.A. Via Candini, 2 40012 Calderara di Reno - Bologna - Italy Warning and Device Class Label For installation, use and maintenance it is not necessary to open the scanner. -
Page 9: Ce Compliance
FCC COMPLIANCE Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference which may cause undesired operation. -
Page 10: General View
GENERAL VIEW DS2200 Figure A Barcode Image Input Window Ext Trig LED Laser Beam Output Window TX Data LED Power On LED Mounting Holes Good Read LED Laser Warning and Device Class Label Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 11: Guide To Installation
GUIDE TO INSTALLATION The following can be used as a checklist to verify all the necessary steps for complete installation of the DS2200 scanner. Read all information in the section "Safety Precautions” at the beginning of this manual. Correctly mount the reader using the bracket provided according to the information in par. -
Page 12: Introduction
The DS2200 scanner is a cost effective barcode reader complete with decoder designed to satisfy demanding requirements associated with high performance scanning. The DS2200 ultra compact dimensions, based on Datalogic's experience in miniaturized laser components, make the scanner's integration into automated equipment extremely easy. -
Page 13: Indicators
DS2200 A security system allows the laser to activate only once the motor has reached the correct rotational speed; consequently, the laser beam is generated after a slight delay from the power on of the scanner. 1.1.1 Indicators The four LEDs on the scanner indicate the following: POWER ON (red), indicates the reader is connected to the power supply. -
Page 14: Accessories
INTRODUCTION The following models are therefore available: DS2200 - X X X X Optical Resolution Reading Window Position 1 = Standard Resolution 0 = Direct 2 = High Resolution Communication Interface Optic Version 1 = RS232 + RS485 0 = Linear 1 = Raster The following tables display each version’s reading performance. -
Page 15: Installation
DS2200 INSTALLATION PACKAGE CONTENTS Verify that the DS2200 reader and all the parts supplied with the equipment are present and intact when opening the packaging; the list of parts includes: DS2200 reader with cable Quick Reference Guide WinHost CD-ROM Bar code test chart (PCS = 0.9) Mounting kit: - bracket - screws Figure 1 - DS2200 Package Contents... -
Page 16: Mechanical Installation
INSTALLATION MECHANICAL INSTALLATION DS2200 can be installed to operate in any position. There are three screw holes (M2.5 x 5) on the body of the reader for mounting. The diagram below gives all the information required for installation; refer to par. 2.4 for correct positioning of the scanner with respect to the code passage zone. -
Page 17: Mounting Ds2200
DS2200 2.2.1 Mounting DS2200 Using the DS2200 mounting bracket you can obtain the most suitable position for the reader as shown in the figure below: Pitch Skew Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 18: Electrical Connections
INSTALLATION ELECTRICAL CONNECTIONS The DS2200 cable is equipped with a 25-pin female D-sub connector for connection with the power supply and input/output signals: Do not connect GND and SGND to different (external) ground references. GND and SGND are internally connected through filtering circuitry which can be permanently damaged if subjected to voltage drops over 0.8 Vdc. -
Page 19: Power Supply
Main Serial Interface - RS485 Half-Duplex The RS485 half-duplex interface (3 wires + shield) is used for polled communication protocols. It can be used for Multidrop connections in a master/slave layout, or with a Datalogic Multiplexer (see par. 2.6.2 and 2.6.3). The connector pinout follows:... -
Page 20: Auxiliary Interface - Rs232
INSTALLATION The following figure shows an example of a multidrop configuration between a Multiplexer and DS2200 scanners. 120 Ohm max. 2 m. DS2200 (up to 31) DS2200 Three wires + shield max. 1200 m. RTX485+ DS2200 RTX485- SGND RTX485 + RTX485 - MULTIPLEXER RS485 REF... -
Page 21: Inputs
DS2200 USER INTERFACE DS2200 RXAUX TXAUX SGND SGND Figure 7 - RS232 auxiliary interface connections 2.3.4 Inputs The inputs available on the connector supplied with the scanner are indicated below: Name Function EXT TRIG- external trigger (input -) I/O REF I/O reference The EXT TRIG input is used to connect the external trigger which tells the scanner to scan for a code. -
Page 22: Outputs
INSTALLATION 2.3.5 Outputs Two general purpose outputs are available. These outputs can only be connected as open collector configurations. The following pins are present on the connector of the scanner: Name Function OUT1+ output 1 + OUT2+ output 2 + 10, 12, 22 I/O REF I/O reference The meaning of the two outputs OUT1 and OUT2 can be defined by the user (No... -
Page 23: User Interface
DS2200 USER INTERFACE The following table contains the pinout for standard RS232 PC Host interface. For other user interface types, please refer to their own manual. RS232 PC-side connections 9-pin male connector 25-pin male connector Name Name How To Build A Simple Interface Test Cable: The following wiring diagram shows a simple test cable including power, external (push-button) trigger and PC RS232 COM port connections. -
Page 24: Positioning
INSTALLATION POSITIONING The DS2200 scanner is able to decode barcode labels at a variety of angles, however significant angular distortion may degrade reading performance. When mounting the DS2200 take into consideration these three ideal label position angles: Pitch 0°, Skew 15° to 30° and Tilt 0°. Follow the suggestions for the best orientation: The Pitch angle is represented by the value P in Figure 10. - Page 25 DS2200 The Tilt angle is represented by the value T in Figure 12. Position the reader in order to minimize the Tilt angle. Figure 12 - Tilt angle Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 26: Typical Layouts
INSTALLATION TYPICAL LAYOUTS The following typical layouts refer to system hardware configurations. Dotted lines in the figures refer to optional hardware configurations within the particular layout. These layouts also require the correct setup of the software configuration parameters. Complete software configuration procedures can be found in the Guide To Rapid Configuration in the WinHost Help On Line. - Page 27 DS2200 The Master scanner is also connected to the Host on the RS232 auxiliary serial interface. The External Trigger signal is unique to the system; there is a single reading phase and a single message from the Master scanner to the Host computer. It is necessary to bring the External Trigger signal to all the scanners.
-
Page 28: Multiplexer
INSTALLATION 2.6.3 Multiplexer Each scanner is connected to a Multiplexer (for example MX4000) with the RS485 half-duplex main interface. Host RS485 Main Interface Auxiliary Interface (Local Echo) MX4000 External Trigger (for On-Line mode) Figure 15 - Multiplexer layout The auxiliary serial interface can be used in Local Echo mode to control any single scanner (visualize collected data) or to configure it using the WinHost utility or Host Mode programming procedure. -
Page 29: Reading Features
DS2200 READING FEATURES The number of scans performed on the code by the DS2200 and therefore the decoding capability is influenced by the following parameters: number of scans per second code motion speed label dimensions scan direction with respect to code motion At least 5 scans during the code passage should be allowed to ensure a successful read. -
Page 30: Picket-Fence Mode
READING FEATURES For example, the DS2200 (500 scans/sec.) for a 25 mm high code moving at 500 mm/s performs: [(25/500) * 500] - 2 = 23 effective scans. PICKET-FENCE MODE Direction of code movement at LS speed Laser beam DS2200 Figure 17 - "Picket Fence"... -
Page 31: Performance
Raster Raster versions are available. If standard devices do not satisfy specific requirements, contact your nearest Datalogic distributor, supplying code samples, to obtain complete information on the reading possibilities. The max. capture of the Raster version is about 15 mm (0.6 in) at 220 mm (8.7 in). -
Page 32: Reading Diagrams
READING FEATURES READING DIAGRAMS The following diagrams show the reading distance for barcodes with different densities. DS2200-1XXX (Standard Resolution) (in) 80 100 120 140 160 180 200 220 240 260 (mm) 0.15 mm 0.20 mm 0.30 mm 0.50 mm 0.60 mm (6 mils) (8 mils) (12 mils) - Page 33 DS2200 DS2200-2XXX (High Resolution) (in) (mm) 90 100 110 120 130 0.12 mm 0.15 mm 0.10 mm 0.20 mm (5 mils) (6 mils) (4 mils) (8 mils) (mm) (in) NOTE: (0,0) is the center of the laser beam output window. CONDITIONS: Code = Interleaved 2/5 or Code 39...
-
Page 34: Maintenance
MAINTENANCE MAINTENANCE CLEANING Clean the windows periodically for continued correct operation of the reader. Dust, dirt, etc. on the windows may alter the reading performance. Repeat the operation frequently in particularly dirty environments. Use soft material and alcohol to clean the windows and avoid any abrasive substances. -
Page 35: Technical Features
DS2200 TECHNICAL FEATURES DS2200-1XXX DS2200-2XXX ELECTRICAL FEATURES Power Maximum input voltage 5 Vdc Consumption 0.4 A; 2 W max. Serial Interfaces Main RS485 Half-Duplex Auxiliary RS232 Baud Rates 150 to 115200 Inputs External Trigger Outputs User-defined OUT1 and OUT2 max. 50 Vdc Collector current max. - Page 36 TECHNICAL FEATURES SOFTWARE FEATURES READABLE CODE SYMBOLOGIES EAN/UPC Code 93 (including Add-on 2 and Add-on 5) 2/5 Interleaved Code 128 Code 39 (Standard and Full ASCII) EAN 128 Codabar Pharmacode Other symbologies available on request Code Selection up to six codes during one reading phase Decoding Safety can enable multiple good reads of same code Headers and Terminators...
-
Page 37: Glossary
This organization (a service of the Food and Drug Administration) is responsible for the safety regulations governing acceptable limitations on electronic radiation from laser devices. Datalogic devices are in compliance with the CDRH regulations. Code Positioning Variation in code placement that affects the ability of a scanner to read a code. The terms Pitch, Skew, and Tilt deal with the angular variations of code positioning in the X, Y and Z axes. - Page 38 EEPROM Electrically Erasable Programmable Read-Only Memory. An on-board non-volatile memory chip. Full Duplex Simultaneous, two-way, independent transmission in both directions. Half Duplex Transmission in either direction, but not simultaneously. Host A computer that serves other terminals in a network, providing services such as network control, database access, special programs, supervisory programs, or programming languages.
- Page 39 Protocol A formal set of conventions governing the formatting and relative timing of message exchange between two communicating systems. Raster The process of projecting the laser beam at varied angles spaced evenly from each other. Typically, the mirrored rotor surfaces are angled to create multiple scan lines instead of a single beam.
- Page 40 Tilt Rotation around the Z axis. Used to describe the position of the barcode with respect to the laser scan line. See pars. 2.2.1 and 2.5. Trigger Signal A signal, typically provided by a photoelectric sensor or proximity switch, which informs the scanner of the presence of an object within its reading zone.
-
Page 41: Index
INDEX Model Description; 2 Mounting DS2200; 6 Accessories; 3 Outputs; 11 CE Compliance; viii Cleaning; 23 Package Contents; 4 Performance; 20 Picket-Fence Mode; 19 Electrical Connections; 7 Positioning; 13 Power Supply; vii; 8 FCC Compliance; viii Raster; 20 Reading Diagrams; 21 Reading Features;... - Page 42 DECLARATION OF CONFORMITY Datalogic Automation S.r.l., Via S. Vitalino 13 40012 - Lippo di Calderara Bologna - Italy dichiara che declares that the déclare que le bescheinigt, daß das Gerät declare que el DS2200-XXXX Laser Scanner e tutti i suoi modelli and all its models et tous ses modèles...
- Page 43 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...