5 - 10 Symbol LS3408 Product Reference Guide
Function Key Mapping
ASCII values under 32 are normally sent as control key sequences (see
parameter to send the keys in bold in place of the standard key mapping. Table entries that do not have a bold
entry remain the same whether or not you enable this parameter.
FN1 Substitution
Enable this to replace any FN1 characters in an EAN128 bar code with a user-selected keystroke. See
Substitution Values on page
Send Make and Break
Enable this to prevent sending the scan codes for releasing a key.
Enable Function Key Mapping
*Disable Function Key Mapping
13-7.
Enable FN1 Substitution
*Disable FN1 Substitution
*Send Make and Break Scan Codes
Send Make Scan Code Only
Table 5-2 on page
5-13). Enable this
FN1