HP E4419B User Manual page 57

Making Measurements with the HP E-Series Power Sensors
measurement of both channels, or a difference measurement
between both channels. Use the following key presses:
Meas
Press ,
Input Select
Setup
the measurement you require, either
then , or
A-B B-A
11. The measurement result is now displayed.
Example
To make a measurement on channel A using an HP E-series power sensor.
The frequency of the signal to be measured is 100 MHz.
• Disconnect the power sensor from any source.
Zero
• Press .
Cal
• Press
Zero A
• Connect the power sensor to the POWER REF output.
• Press Cal Cal A ,
Frequency
• Press
Cal Fac
hardkeys to enter 100. Press
• Connect the power sensor to the signal to be measured.
• The measurement result is now displayed.
HP E4419B User's Guide
Get other manuals https://www.bkmanuals.com
. Select the appropriate softkey for
.
.
.
, . Use the
A Freq
.
MHz
Power Meter Operation
, , , , or
A B A/B B/A
More
, , and
,
2-17