HP E4419B User Manual page 155

Limits
Press this softkey to access a menu which allows you to enter
the upper and lower measurement limits. Refer to "Setting
Measurement Limits", on page 2-46 for further information.
Limits Off On
Press this softkey to toggle between the test limits being on
or off. The default is "Off".
Max
Press this softkey to enter the upper measurement limit in
the range -150 dBm to 230 dBm. The default value is
90.00 dBm. Use the
change the value. To confirm your choice press the
appropriate measurement units.
.
Min
Min
Press this softkey to enter the lower measurement limit in
the range -150 dBm to 230 dBm. The default value is
-90.00 dBm. Use the
change the value. To confirm your choice press the
appropriate measurement units.
.
Max
Duty Cycle Off On
Press this softkey to toggle the duty cycle value on or off. The
default is "Off ". The duty cycle value is set using
Duty Cycle
Duty Cycle
Press this softkey to set the duty cycle for the pulse power
measurement feature of the power meter. A value in the range
of 0.001% to 100% can be entered. The default value is 1.000%.
Use the
value. To confirm your choice press
is automatically set to "On" when a value is entered using
Duty Cycle
page 2-44 for further information.
ChA Filter
Press this softkey to access a menu which allows you to switch
the filter off and on, set the filter length, select automatic or
manual mode and switch step detection off and on.
HP E4419B User's Guide
Get other manuals https://www.bkmanuals.com
Front Panel Menu Reference "System/Inputs" Menu
, ,
Max
, ,
Min
.
, , and
. Refer to "Measuring Pulsed Signals", on
or
ChB Filter
Menu Reference
and hardkeys to
must be greater than
and hardkeys to
must be less than
hardkeys to change the
.
% Duty Cycle Off On
3-27