Table of Contents
Advertisement
Freq Dep Offset
Press this softkey to access a menu and screen which allows
you to select and edit frequency dependent offset tables. Use
the
and
frequency dependent offset tables.
Edit Table
Press this softkey to access a menu and screen which allows
you to modify, add and remove frequency, calibration factors
and offsets from the currently selected table and modify the
table name. Use the
move between the name, frequency, calibration factors and
offsets. Press
Change
Press this softkey to modify the highlighted parameter,
which is either a frequency, calibration factor, offset or
table name. A pop up window displays the parameter. Use
the
parameter value. To confirm your choice press
Insert
Press this softkey to insert a new table entry. You are
prompted to enter the frequency and calibration factor or
offset. The entry is inserted in ascending frequency order.
Delete
Press this softkey to delete a table entry. If you delete the
frequency the corresponding calibration factor or offset is
also removed and vice versa.
Done
Press this softkey to return to the measurement screen.
The softkeys from the first level of the "System/Inputs"
menu are displayed.
A Table Off On
Press this softkey to enable and disable the highlighted table
for channel A. "A" or "B" is displayed beside each table to
indicate it's current state and use.
B Table Off On
Press this softkey to enable and disable the highlighted table
for channel B. "A" or "B" is displayed beside each table to
indicate it's current state and use.
HP E4419B User's Guide
Get other manuals https://www.bkmanuals.com
Front Panel Menu Reference "System/Inputs" Menu
hardkeys to scroll through the displayed
,
,
,
or
Change Insert
,
,
and
Menu Reference
and
hardkeys to
as follows:
Delete
hardkeys to change the
Enter
.
3-25
Advertisement
Table of Contents
