Usb 3.0 B Connector Cn704; Display Port Connector Cn501 - HP Engage 15t Maintenance And Service Manual

USB 3.0 B connector CN704

Repair the USB 3.0 B connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Lift the CN704 connector from the circuit board.
3) Place the new component on the circuit board. Be sure that it matches the circuit board footprint.
4) Solder the new component.

Display Port connector CN501

Repair the DP connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Use a hot air gun to melt the solder on the pins.
17