2) Lift the CN1002/CN1102/CN1104 connector from the circuit board.
3) Place the new component on the circuit board. Be sure that it matches the footprint.
4) Solder the new component.
USB 3.0 A connector CN154
Repair the USB 3.0A connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Lift the CN154 connector from the PCB.
3) Place the new component on the circuit board. Be sure that it matches the footprint.
4) Solder the new component.
USB type-c connector CN152
Repair the USB type-c connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
24