Usb-C Connector; Usb-A Connector Usb1/Usb2 - HP 7 Pro Series Maintenance And Service Manual

4) Solder the new component.

USB-C connector

Repair the USB-C connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Lift the USB-C connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component

USB-A connector USB1/USB2

Repair the USB-A connector:
1) Use a hot air gun to melt the solder on the pins. Pin solder with soldering iron and absorber. You can gently
push down with the soldering iron once everything is molten to move USB-A connector out of the through
holes.
18