Power Board; Connector Repair - HP Engage 15t Maintenance And Service Manual

Power board

The power board is adapter.

Connector repair

This procedure includes USB 3.0A, USB 3.0 B, DisplayPort and DC POWER JACK connectors.
The connectors are on the main board (board part number CBPR2EBH5Q1).
The connectors identifiers are as follows:
Connector
USB 3.0 A
USB 3.0 B
DisplayPort
DC POWER JACK CN101
Before repairing connectors, follow these steps:
▲ Prepare the monitor for disassembly. See Preparation for disassembly on page 10.
IMPORTANT:
• Repair Condition: Connector repair is only for out of warranty.
• Repairing must operate by professional repairers (Note) in repair center, not applicable for end user.
• Electrostatic protection is required when component replacement is required.
• The monitor meets ROHS, please use Lead-free solder wire for soldering.
• If Connector need to replace, must check specification and part number whether match the BOM and location.
14
Location
CN703/CN705
CN704
CN501
Main Board
CN703
CN705
CN704
CN101
CN501