Trane FARRAR ULC Series Installation, Operation And Maintenance Manual page 25

Alarm Log
The ALARM LOG screen shows all current and previous alarm conditions detected by the control system. Information logged
with each alarm includes:
Occurrence: Shows the date and time when the alarm occurred.
Message: Lists the specific alarm that occurred.
Recover: Shows the date and time that the alarm stopped.
Acknowledge: Shows the date and time that the alarm was acknowledged by an operator.
The icons below the alarm list allow the operator to manage the alarm log as follows:
Select: Touch this icon to begin the selection of a specific alarm item.
Up: Touch this icon to scroll up the list of alarms.
Down: Touch this icon to scroll down the list of alarms.
Check: Touch this icon to acknowledge a specific alarm. The Acknowledge column will populate with the current
date and time.
Delete: Touch this icon to delete the specific alarm item that is selected.
The remaining two buttons on this screen have the following functions:
Figure 17: Alarm Log Screen
Silence Audible Alarm. Silences any current audible alarm. This is subject to the RING BACK
DELAY described in the Alarm Setup section of this manual.
Home Screen. Closes the ALARM LOG screen and returns to the HOME screen.
ULC SERIES INSTRUCTION MANUAL
25